Type and Function Of Excavator Bucket

Below, take you to know the common types of excavator buckets as follows:
1.Standard bucket
The standard bucket is a standard bucket that is more common in small and medium-sized excavators. It adopts a standard plate thickness and has no obvious reinforcement process on the bucket body.
The characteristics are: the bucket capacity is larger, the bucket mouth area is larger, and the pile loading surface is larger, so the excavator has a high filling coefficient, high work efficiency and low production cost.
Suitable for general clay excavation and sand, soil, gravel loading and other light working environment, also known as earth bucket.
The disadvantages are: due to the small thickness of the plate, the lack of reinforcement version, anti-wear plate and other strengthening processes, the life is short.

2.Reinforced bucket
Strengthening the bucket is a bucket that adopts high-strength wear-resistant steel material to strengthen the high-stress and easy-to-wear parts on the basis of the original standard bucket. It not only inherits all the advantages of the standard bucket, but also greatly improves the strength and wear resistance, and greatly prolongs the service life. Suitable for digging hard soil, soft stone, gravel, gravel loading and other heavy duty operations.

3.Rock bucket
The whole rock bucket adopts thickened plate, increases the reinforcement plate at the bottom, increases the side protection plate, installs the protection plate, and has high strength bucket tooth base, which is suitable for heavy working environment such as stone, secondary hard stone, wind fossil, hard stone, and ore loading after blasting. It is widely used in harsh conditions such as ore mining.

4.Scarifier bucket
The excavation hopper is to install high-strength excavation teeth on the bucket to achieve greater excavation strength, and the excavation is completed at one time.
It is suitable for the grinding, excavation and loading of hard soil, sub-hard stone and wind fossil.
The disadvantage is that the bucket capacity is small.

5.Shell bucket
The working principle of the shell bucket is that through the expansion of the oil cylinder, the shell body is driven to open and merge to grasp the material, so as to complete the operation.
It is suitable for excavation of foundation pit, deep pit excavation and unloading and loading of loose materials such as coal and sand in building bases, especially in some restricted Spaces for excavation or loading.
The disadvantage is that the digging force is weak, it is not suitable for some harder land ground, and can only grab loose materials.

Each bucket introduced here also has its own magic, choose the right bucket, excavator work can not only play a multiplier effect with half the effort, but also can achieve the most ideal operation effect.